hascases.blogg.se - Cinch audio recorder 2.0.1

CINCH AUDIO RECORDER 2.0.1 FULL

However, the mic has a 10-year warranty once it has been registered.

CINCH AUDIO RECORDER 2.0.1 FULL

The VideoMic NTG features an in-built lithium-ion battery that provides 30+ hours of recording and charges via USB-C (from empty to full in two hours) The internal battery is not user replaceable. Note: This can be used in conjunction with the high-pass filters for even greater flexibility when recording.

Press and hold again to disengage the high frequency boost.

Press and hold the button to engage the high frequency boost (right LED will illuminate).

There is also a high frequency boost for enhancing clarity and detail in your recording (particularly handy if you are using a windshield, which can make recordings sound muffled). Note: The 150Hz filter will cut more bass frequencies, so this is suitable in more adverse conditions.

Press a third time to disengage both filters (left and middle LEDs will turn off).

Pressing again to engage the 150Hz high-pass filter (middle LED will illuminate).

Press this button once to engage the 75Hz high-pass filter (left LED will illuminate).These will cut lower frequencies to help mitigate wind noise and other low frequency rumble (traffic noise, air conditioning etc). There are two high-pass filters available. Note: The safety channel does not work with devices that have a TRRS input, such as smartphones, as these inputs only support one channel of audio. Read more about using the pad and safety channel here. Press and third time to engage both the pad and safety channel (both LEDs will illuminate).Press once more to engage the safety channel (left LED will turn off, middle LED will illuminate).Press the button once to engage the -20dB pad (left LED will illuminate).The VideoMic NTG has a host of useful features for making sure your audio is clear and distortion-free when recording loud sound sources, including a -20dB cut (aka ‘pad’), and a safety channel, which records a second track at -20dB that you can substitute for your main track in post-production if it distorts. By default, it will automatically power on when connected to a device, or when the connected device turns on, and power off when disconnected from a device, or when the device turns off. The VideoMic NTG also has a handy auto power feature. Press and hold for three seconds to manually turn the mic on/off.